Development Hardware

The hardware used during WODE development was Embedded Artists' LPC3131 Development Board.

Development Hardware Overview

Embedded Artists' LPC3131 OEM Board (mounted on the LPC31xx Base Board) lets you get up-and-running quickly with NXP's ARM926EJ-S LPC3xxx microcontroller series in general and with LPC3131 in particular. The OEM board has SODIMM format and is only 66x48 mm and is perfect for running Linux with large on-board RAM and FLASH. All processor signals are available on the 200 pos connector for easy expansion. The board can be used in OEM applications, as well as for education purposes, experiment, and prototype projects.

Linux Distribution NXP will provide a Linux distribution for the board based on Linux 2.6 and using APEX for booting. The distribution is provided "as-is" and without any support from Embedded Artists.

LPC3131 OEM Board Features

Processor: NXP's ARM926EJ-S LPC3131 microcontroller in BGA package 1

External Flash: 256 MB NAND FLASH (2Gbit), 4 MB SPI-NOR FLASH (32Mbit)

Data Memory: 64 MB SDRAM + 192 KB internal 16-bit data bus to SDRAM

USB: High-speed USB 2.0 (OTG, Host, Device) with on-chip PHY

Clock Crystals: 12.000 MHz crystal for CPU

Dimensions: 66 x 48 mm Power +5V powering

Connectors: 200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch

Other: 256 Kbit I2C E2PROM for storing non-volatile parameters, Buffered 16-bit databus

LPC31xx Base Board Features

Connectors:

Power: Power supply, either via USB or external 9-15V DC LPC3131 OEM Board is powered with +5V

Other:


CategoryTechnicalDocumentation

  1. The LPC3131 has a clock speed of 180Mhz compared to the WODE's LPC3143 270Mhz developers worked around this initially by overclocking the LPC3131 (1)

DevelopmentHardware (last edited 2011-08-15 17:05:19 by Wiisel)